J4C Brushless Actuator | One for all voltages

Multivoltage Brushless J4C S20 / S300 Series

J4C Brushless Actuator for all voltages | J4C S20 S35 S55 S85 S140 S300

Voltage range 24 Volts up to 240 Volt DC/AC 50-60Hz

J4C S20 / S300 Series

J4C S is the new brushless multivoltage drive from J+J, this fourth generation J + J electric drive consists of 6 models with a torque of 20, 35, 55, 85, 140 and 300 Nm. The big difference is that not only has the voltage range become larger, but the actuator is also equipped with a brushless motor, which makes the life-time much better than before. Now you can with the new J4C, which is expanded with a 140 and 300 Nm version, suffice with 1 type of brushless drive for 24-240V AC / DC where previously 12 24-AC / DC or 85-240V AC / DC were needed.

Some advantages at a glance:

• Brushless motor.
• Working Anglefreely adjustable between 0° en 270°.
• ETL (Electrical torque limiter).
• AVS (Automatic voltage recognition).
• ATC (Automatic temperature control to avoid condensation).
• MO (Manual emergency override).
• VFC (2 integrated potential free microswitches for feedback). VCO (A continues lighting 2 color LED indicates normal operation of the actuator).
• PES (Protected electrical supply, the J3 accepts the same wiring connection for either AC or DC operation)

More Colour LED

More Colour LED

Bluetooth

With the bluetooth option a comprehensive tool for setup and operation of our actuators has been introduced.

Bluetooth

Whether you need to change the configuration during installation or to control the actuators position, regardless of the electronic wiring, with this option you can do all these activities with your smartphone or tablet. You will also receive detailed information of the operatinal status, as well as any error messages from the internal software and can directly access important product information via the Internet. The communication is password protected and up to 50 devices within a radius of 20m can be used.

Modbus

With our modbus option, we introduce the connection to an established communication protocol of the industry. The connection is possible via cable or wifi.

With the wifi system, every actuator is emitting and recieving at the same, creating a communication mesh.

The communication is under 802.15.4 protocoll with 12 possible bands.

Modbus

What were you used to

So you were used to need different versions of J + J electric drives due to the different voltages.

That time is at ……. ask our sales team for more technical information and availability.

Life-time improvement

In addition to the advantages with the J4C actuator that for all voltages between 24 and 240 volts both DC and AC 50-60Hz only one actuator is required, the use of a brushless motor significantly improves the life-time.

Guarantee

Warranty can even run up to 3 years with a maximum number of circuits of 120,000. For more detailed information about the new possibilities of the J4C, contact our sales department at +31 499 49 10