Equflow

Equflow | Sectional Drawing

Equflow | Working Principle

• The static worm forces the fluid to rotate
• The rotating fluid causes the rotor with reflectors to move without friction
• The number of reflections measured by the infrared sensor determines the flow
• Due to the construction, opaque liquids can also be accurately measured
• The very low mass of the rotor guarantees an adequate response to small changes in the flow

PFA fixed turbine flow meter

De PFA/Teflon turbine doorstromingsmeter met infrarood reflectie meting van Equflow, is in staat om vanaf zeer lage stoomsnelheden te meten in een breed scala van applicaties. De Turbine Flow meter is geschikt voor heldere-, ondoorzichtige-. neutrale-, corrosieve en chemisch agressieve vloeistoffen inclusief brandstoffen. Een ultra lichtgewicht turbinerotor volgt zeer accuraat de veranderingen in de doorstroming en genereert een IR gereflecteerd digitaal uitgangs signaal met een hoge resolutie. In zowel doostromings- als bewakings applicaties of als programmeerbare doorstroomschakelaar is de vaste PFA turbine doorstromingsmeter toepasbaar, totaliseren behoort eveneens tot de mogelijkheden.

PFA fixed turbine flow meter charasteristics

• High resolution, proportional to the flow.
• Flow measurement through revolutionary infrared turbine rotor reflection.
• PFA / Teflon for high chemical and corrosion resistance
• High measurement accuracy and reproducibility
• Suitable for opaque liquids
• Programmable pulse output
• Complies with US Pharmacopeia Class VI Prescriptions
• TSE / BSE statement available
• Sterilize among others with Autoclave - ETO - CIP

Technical characteristics: PFA fixed turbine flow meter

• All parts that come into contact with liquid are made from Teflon® / PFA with a ruby ​​bearing.
• High resolution, flow meter type 4.5 = 110,000 imp / liter
• Infrared reflection measurement of the flow
• Flow meter range (water) in L / min:
• Type 0045: 0.06 - 2 pfa fixed Equflow turbine flow meter
• Type 0085: 0.5 - 20
• Type 0125: 1.5 - 40
• Viscosity range 0.8 - 10 mm² / Sec (cSt)
• Temperature range -20 - + 80ºC (temporarily 120ºC)
• Working pressures:
• Type 0045: 0 - 20 bar
• Type 0085: 0 - 15 Bar
• Type 0125: 0 - 10 Bar
• Repeatability: <0.15%
• Supply voltage 5 - 30 VDC 35 mA at 5 volts
• Output signal: square wave pulse
• Protection class IP65
• BSP / NPT pipe connection / hose connection

PFA fixed turbine flow meter

PFA Disposable turbine doorstromingsmeter

The PFA / Teflon disposable turbine flow meter with infrared reflection measurement from Equflow, is capable of measuring from very low steam speeds in a wide range of applications and has been specially developed to enable rapid change of measuring tube in one-off applications. (For hygienic reasons, for example in pharmaceutical and bio-medical industrial applications). The Turbine Flow meter is suitable for clear, opaque. neutral, corrosive and chemically aggressive liquids including fuels. An ultra-lightweight turbine rotor follows the changes in the flow very accurately and generates an IR-reflected digital output signal with a high resolution. The disposable PFA turbine flow meter can be used in both box flow and monitoring applications or as a programmable flow switch. Totalization is also possible. Although the term single application, disposable does not suggest this, these flow meters are also suitable for long-term measurements.

PFA Disposable turbine flow meter characteristics:

• Fast replacement of measuring tube possible.
• High resolution, proportional to the flow.
• Flow measurement through revolutionary infrared turbine rotor reflection.
• PFA / Teflon for high chemical and corrosion resistance.
• High measurement accuracy and reproducibility.
• Suitable for opaque liquids.
• Programmable pulse output.
• Complies with the US Pharmacopeia Class VI Prescriptions,
• BSE / TSE certificates available

Technical characteristics: PFA Disposable turbine flow meter

• All parts that come into contact with liquid are made from Teflon® / PFA with a ruby ​​bearing.
• High resolution, flow meter type 4.5 = 110,000 imp / liter
• Infrared reflection measurement of the flow
• Measuring tube can be sterilized with a temperature of up to 160 ° C
• pfa disposable Equflow turbine flow meter Flow meter range (water) in L / min:
• Type 0045: 0.06 - 2
• Type 0085: 0.5 - 20
• Type 0125: 1.5 - 40
• Viscosity range 0.8 - 10 mm² / Sec (cSt)
• Temperature range -20 - + 80ºC (temporarily 120ºC)
• Working pressures:
• Type 0045: 0 - 20 bar
• Type 0085: 0 - 15 Bar
• Type 0125: 0 - 10 Bar
• Repeatability: <0.15%
• Supply voltage 5 - 30 VDC 35 mA at 5 volts
• Output signal: square wave pulse
• Protection class IP65
• BSP / NPT pipe connection / hose connection

PFA fixed turbine flow meter

PVDF Disposable turbine doorstromingsmeter

Excellent performance in pharmaceutical, medical and biotechnical "one-off" applications.

This flow meter measures very low flows in a wide range of flow processes and is especially developed to be able to quickly change the measuring tube for one-off applications. (For hygienic reasons eg in pharmaceutical and bio medical industrial applications). Although the term one-time application does not suggest this, these devices are also suitable for long-term measurements.

Available in 2 designs, both with interchangeable measuring tube:

- Clip confirmation
- Tube holder

PFA Disposable turbine flow meter characteristics:

• Fast replacement of measuring tube possible
• Block voltage output in high resolution
• Flow measurement through revolutionary infrared turbine rotor reflection
• PVDF for good chemical and corrosion resistance
• High measurement accuracy (1%) and repeat reliability (0.15%)
• Suitable for opaque liquids
• Programmable pulse output <br PVDF conforms to US Pharmacopeia Class VI requirements
• The measuring tube can be sterilized up to 140 ° C
• Resistant to gamma radiation up to 50 kGy

Technical characteristics: PVDF Disposable turbine flow meter

• All parts that come into contact with liquid are made from PVDF with a ruby ​​bearing.
• High resolution, flow meter type 4.5 = 100,000 imp / liter
• Infrared reflection measurement of the flow
• Flow meter range (water) in L / min:
• Type 0045: 0.03 - 2
• Type 0085: 0.3 - 20
• Viscosity range 0.8 - 10 mm² / Sec (cSt)
• Temperature range -20 - + 80ºC (temporarily 120ºC)
• Working pressures:
• Type 0045: 0 - 25 bar
• Type 0085: 0 - 20 Bar
• Repeatability: <0.15%
• Supply voltage 5 - 30 VDC 34 mA at 5 volts
• Output signal: square wave pulse
• Protection class IP65
• BSP / NPT pipe connection / hose connection

RVS turbine doorstromingsmeter

The stainless steel turbine flow meter with infrared reflection measurement from Equflow, is capable of measuring from very low steam speeds in a wide range of applications. The Turbine Flow meter is suitable for clear, opaque. neutral, corrosive and chemically aggressive liquids including fuels. Excellent for applications with high pressure. An ultra-lightweight turbine rotor follows the changes in the flow very accurately and generates an IR-reflected digital output signal with a high resolution. The stainless steel turbine flow meter can be used in both box flow and monitoring applications or as a programmable flow switch. Totalization is also possible.

Stainless steel turbine flow meter characteristics:

• High resolution, proportional to the flow.
• Flow measurement through revolutionary infrared turbine rotor reflection.
• Stainless steel / PFA parts for high corrosion resistance
• Very suitable for applications with high process pressure
• High measurement accuracy and reproducibility
• Suitable for opaque liquids
• Programmable pulse output

Technical characteristics: Stainless steel turbine flow meter

• All parts that come into contact with liquid are made of stainless steel 316L / PFA with a ruby ​​ceramic bearing and FPM (Viton) gaskets.
• High resolution, flow meter type 4.5 = 110,000 imp / liter
• Infrared reflection measurement of the flow
• Flow meter range (water) in L / min:
• Type 0045: 0.06 - 2
• Type 0085: 0.5 - 20
• Type 0125: 1.5 - 40
• Viscosity range 0.8 - 10 mm² / Sec (cSt)
• Temperature range -20 - + 80ºC (temporarily 120ºC)
• Working pressures:
• Type 0045: 0 - 200 bar
• Type 0085: 0 - 200 Bar
• Type 0125: 0 - 150 Bar
• Repeatability: <0.15%
• Supply voltage 5 - 30 VDC 35 mA at 5 volts
• Output signal: square wave pulse
• Protection class IP65
• BSP / NPT pipe connection

Stainless steel turbine flow meter

Equflow Flowmeters options

The PFA turbine flow meter can easily be modified in a programmable flow switch. The switching point is set with a simple programming device. When the set switch point is reached, the flow meter sends a 24 VDC signal to a switch module. As soon as the flow falls below the set value, the switching module is switched off.

Toepassingen:

• Flow monitoring
• Leak detection

Batch arrangement:

The PFA Turbine Flow Meter is equipped with an adjustable counter (preset function). An adjustable micro-prosessor in the meter makes it possible to open and close a solenoid valve after a predetermined volume, without having to use a PLC (Programmable Logic Controller). Only an order to start the batch process is sufficient.
Applications:

Repeating dosage of a fixed volume as in:

• Coffee machines
• Soup machines
• Ampoules
• Bags drip
• Bottles

Batch en Flow controller Model S/601

Batch and Flow controller Model S / 601
Easy to program controller for batching, dosing, filling, mixing and totalizing. Multifunctional and easy to use with 4 keys. Provided with a clear 2x16 LCD display and audio signal automatic power down and data safe provision

Application examples:

• batch to mainstream
• batch in time
• filling 2 liquids at the same time
• filling of 2 liquids sequentially
• proportional mixing

Batch and Flow controller Model S / 601 characteristics:

Repeating dosage of a fixed volume as in:

• very simple operationEquflow batch and flow controller
• attractive and compact design
• clearly readable display
• clearly audible buzzer
• various housings (plastic, aluminum, stainless steel)
• RS232 serial port (Profibus as an option)
• PID controller
• High accuracy due to automatic post-compensation and adjustable damping factor

Assembly batch and Flow controller

The controller is mounted in an impact-resistant synthetic housing with IP65 approval. Various indicators for simple analysis in the event of process errors. The controller is equipped with an automatic power-down and data safe mode.

Programmable:

• K factor
• Volume streams 1 and 2
• Dose interval
• Leak alarm
• No flow alarm
• Reading out of different units
• Adjustable lag correction
• Login codes
• Etc. etc.

Batch en Flow controller Model S/601

Comunication:

• •Ethernet